Hi-Temp Alert

Hi-Temp Alert is a high temperature alarm with internal and remote signaling capabilities. It is used in conjunction with saunas, steam rooms, spas and hot tubs. The alarm is set at a desired temperature. If the temperature rises above the set point, the alarm sounds and interrupts the power to the heating source. The audible part of the alarm can be silenced after it has been activated by high temperature conditions. However, this will not reset the power to the heating source. The heating source can only be reset by an attendant after the system has cooled to a point below the alarm set point.

Features:

Safety Interlock - For Manual Reset
Independant Alarm Silencer
Audio and Visual Alarm Indicators
Easy-Low Voltage Installation for New or Existing Installations
Probe accurate for 500' with 18 Gauge Wire
Fail Safe Mode
Remote Alarm Capabilities
Digital Temperature Read Out
Interfaces with All Electrically Controlled Heating Sources Including Milli Volt Systems

Specifications:

Dimensions - 5" x 8" x 1-1/2"
Input - 115 volts ac
Remote alarm output - 12 volts dc 0.5 amps
Relay contact ratings - 10 amps - 115 volts, 5 amps - 230 volts
Max power consumption - 15 watts
Calibrated accuracy - ±1 F, ±1 LSD
Set range - 100° to 200° F
Internal audible alarm - 90 db at 4'
1/4" od x 1-1/2"

12 Industrial Road, Pequannock, NJ 07440